{"title":"Stylus Arms","description":"\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-ansi-language: NL;\"\u003eStylus arms, also called tracer arms, are the interchangeable arms with which a contour measuring instrument or roughness tester scans the workpiece. In this collection you will find stylus arms in various lengths and shapes, with different tips, for a wide range of measuring tasks.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-ansi-language: NL;\"\u003eThe stylus arm determines where you can measure. A standard arm measures on flat, easily accessible surfaces. A long or extended arm reaches into deep bores. For small bores, narrow grooves or areas behind a shoulder there are arms with a small diameter or a cranked design. The tip also differs: a fine tip for small radii, a sturdier tip for rougher conditions.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-ansi-language: NL;\"\u003eA stylus arm belongs to a specific instrument or series. Arm and instrument must therefore match, both in connection and in geometry. After changing the arm, the system usually has to be recalibrated so the software knows the correct length and shape of the arm. Without this step, the measured radii and angles will not be correct.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-ansi-language: NL;\"\u003eHandle stylus arms with care. Minor damage to the tip or a bent arm directly affects your measurement result. Keep spare arms in their original packaging. When ordering, tell us the brand and type of your measuring instrument.\u003c\/span\u003e\u003c\/p\u003e","products":[],"url":"https:\/\/www.muraad.nl\/en\/collections\/traceerarmen.oembed","provider":"MuRaad","version":"1.0","type":"link"}